Buying guide
How to choose a custom dress shirt.
A custom shirt is judged in five places: the shoulders, the collar, the sleeve, the body and the cloth. Here is what to look for in each.
Off the rack, made to measure and bespoke: what is the difference?
An off the rack shirt is cut in standard sizes, usually a neck and a sleeve length, for an average body. A made to measure shirt is built from your own measurements. A bespoke shirt goes further: a pattern is drawn from scratch for one person and kept for every later order. At Reza NY Custom Shirts each client has an individual paper pattern, drawn by hand from a full series of measurements.
Five things to check in a well-fitted shirt
1. The shoulders
The seam should sit at the edge of the shoulder bone, not past it and not inside it. If the fabric pulls across the back when you reach forward, the shirt is too tight there, and no other adjustment will fix it.
2. The collar
Buttoned, it should sit against the neck without choking and without a gap. With a tie knotted, there should be no space between the knot and the collar. Collar height and spread are worth deciding deliberately, because they frame the face.
3. The sleeve and cuff
The cuff should end near the wrist bone. Under a jacket, a little cuff, roughly half an inch, should show beyond the jacket sleeve. A French cuff needs to be proportioned to the wrist so that it closes neatly over links.
4. The body
Look for smooth lines with no pulling at the buttons across the chest and no excess fabric billowing at the waist. There should be enough ease to sit, reach and drive comfortably.
5. The cloth
Fibre, yarn and weave matter more than a thread count figure. Poplin is smooth and crisp, twill is softer with a diagonal texture, oxford is heavier and more casual, and linen is cool and creases naturally. At the shop, cloth runs from supreme cottons through to 100% linens and is chosen from the bolt.
What happens at a fitting
There are four stages. A full series of measurements is taken by hand, down to shoulder slope and posture. An individual paper pattern is drawn for you. The shirt is cut and sewn in-house. Then you put it on before it is yours, and anything that needs moving is marked and corrected. See the full process on the how it is made page.
Ready to be fitted?
Orders start at four shirts, and the shop is at 420 Madison Avenue, Room 400, in Midtown Manhattan. Contact the shop to arrange a fitting, or read the questions people ask most first.
Book a fitting
Book a fitting.
Send us a note and we'll call to arrange your visit. Asking costs nothing — call the shop if you would rather talk it through before you decide anything.
- The shop
- 420 Madison Ave, Rm. 400, New York, NY 10017
- Hours
- Mon–Fri 9am–4pm · Sat 9am–2pm · Closed Sunday
- Telephone
- 212.625.3105
- info@rezacustom.com
- @rezanycustom