Shirt details

Dress shirt collars, cuffs and details explained.

Collar and cuff styles do most of the work in how a shirt looks under a jacket. This is what each one is, in plain terms, and when it is the right choice.

Collar styles

A collar has two measurements that matter: its height, how far it rises up the neck, and its spread, the angle between the two points at the front.

The point collar

A narrow spread, with points that sit close together. It suits a narrow face, a small knot and a plain business shirt. It is the traditional American collar and the most forgiving if a tie is only worn occasionally.

The spread collar

Points set wider apart, which leaves room for a larger knot such as a half or full Windsor. It reads as the most formal of the daytime collars and frames the face well. This is the collar most often chosen for business shirts.

The cutaway collar

A very wide spread, almost horizontal. It needs a substantial knot to fill it and looks best on a shirt worn with a tie and a jacket.

The button-down collar

Points fastened to the shirt front with small buttons. Softer in feel and origin, at home on oxford cloth and without a tie. It is the most casual of the collars described here.

The wing collar

Short points turned up and back, worn with black tie and a bow tie. It is a formal evening collar and belongs with a dinner jacket, not with a business suit.

Cuff styles

The barrel cuff

A single cuff, closed with one or two buttons. The everyday choice, and the one that works with every jacket. The cuff should end near the wrist bone, with roughly half an inch showing beyond a jacket sleeve.

The French cuff

A double cuff, folded back on itself and closed with cufflinks rather than buttons. Worn with a jacket, and with black tie. Because it is folded, it is proportioned to the wrist so that it closes neatly over the links.

The smaller details

The front placket

A strip of doubled cloth down the button line, or no strip at all with the buttons set directly on the shirt front. The second is a little dressier and slightly softer across the chest.

Pocket or no pocket

A breast pocket is practical; a clean front is cleaner. Both are made here, and it is decided with the shirt in front of you.

Back pleats

A box pleat or side pleats give room across the shoulders and let the shirt move. A plain back gives the closest line and is better under a closely cut jacket.

Monogram

Initials, set on the cuff, the pocket or the tail. A matter of taste, and a traditional way to mark a shirt that was drawn and cut for one person.

How these decisions are made here

At Reza NY Custom Shirts nothing is picked from a size chart. Collar height and spread, cuff type and depth, placket, pocket and pleats are all settled in the fitting with the cloth in front of you, chosen from the bolt. The measurements that follow are drawn onto an individual paper pattern that stays in the shop for every shirt you order afterwards. See the four stages of making a shirt, or contact the shop to arrange a fitting at 420 Madison Avenue.

Book a fitting

Book a fitting.

Send us a note and we'll call to arrange your visit. Asking costs nothing — call the shop if you would rather talk it through before you decide anything.

The shop
420 Madison Ave, Rm. 400, New York, NY 10017
Hours
Mon–Fri 9am–4pm · Sat 9am–2pm · Closed Sunday
Telephone
212.625.3105
Instagram
@rezanycustom

We'll reply within one business day.

Follow the workroom

See the shirts come together.

Behind-the-bench reels and finished shirts from the Madison Avenue shop, on Instagram and TikTok.